SMOK IPX 80 POD MOD KIT
Please note: Pods are 2ml capacity, as per TPD regulations.
The Smok IPX 80 kit features IP67 protection, an 80 watt maximum output and a huge, 3000 mAh built-in battery. Utilising the RPM 2 coils, this pod mod device can boast rich, stunning vapour and flavour for both mouth to lung and direct to lung vaping
. Created with a 0.96-inch display, which shows you all your vaping information, and dual air-inlet rings allow for easy adjustments.
Available in 7 Amazing Colours
Grey | Blue | Black Carbon Fibre
Brown | Red | Fluid 7-Colour
Fluid Black Grey
The IP67 technology protects the IPX 80 from splashes of water, dust, shaking and accidental drops from a height.
80 Watt Maximum Output
The Smok IPX 80 ranges from 1W-80W and can be adjusted with the up and down buttons allowing you to tailor the wattage to your preference.
A 0.96-inch screen accurately relays your real-time and relevant data, such as your puff count, puff length, wattage, battery percentage and more.
The moment you activate the IPX 80, the moment flavour is delivered. The 0.001s firing speed pushes a perfect vaping experience.
The silicone works to enhance the stability, providing the IPX 80 with layers and preventing fingerprint marks.
Small and Powerful
The 3000 mAh built-in battery, designed for endurance and stability, can be charged with a USB Type-C cable.
IPX 80 RPM Pod and IPX 80 RPM 2 Pod
The SMOK IPX 80 pod mod kit is compatible with both RPM and RPM 2 pods. Each pod is designed to be used with a different coil and is not cross-compatible with each another.
The flatter the mouthpiece is, the less likely there is to be leakage spilling into your mouth.
An interesting air-inlet ring can be rotated to the left to increase the air intake and to the right to decrease air intake.
RPM 2 Coils
Included with the Smok IPX 80 is an RPM 2 0.16ohm mesh coil and an RPM 2 0.6ohm MTL dual coil.
|RPM 2 Mesh
||25 to 50 watts
|Direct to lung vaping
High VG E-Liquids
|RPM 2 DC MTL
||12 to 25 watts
|Mouth to lung vaping
Featuring five safety protections, including:
Lithium Battery Protection | Atomiser Detection
8 Second Cut-Off | Short Circuit Protection
Low Voltage Protection
How to Fill with E-Liquid
To fill this pod mod kit with e-liquid
, simply remove the pod, pull out the rubber plug, fill with e-liquid and then firmly close the plug.
Included with the Kit
Included with the IPX 80 kit is an IPX 80 device, an IPX 80 RPM 2 pod, an RPM 2 0.16 Mesh coil, an RPM 2 0.6ohm MTL Dual coil, a USB Type-C cable and a user manual.
Replacement items for this kit