NEXMESH PRO TANK
Images for display purposes only. Tank is 2ml capacity, as per TPD regulations.
FREE Bulb Glass Included
Upgraded from nexMESh Sub Ohm Tank, the nexMESH Pro tank keeps its conical heating core structure, with the addition of some redesigns.
Available in 6 Colours
#H15 Single Mesh and Parallel Coil
Pairing a mesh coil with a parallel wire coil create a whole new meaning to flavour.
Best at: 65-70W | Resistance: 0.15ohm
Best at: 65-70W | Resistance: 0.15ohm
#H12 Clapton Mesh Coil
Formed into a mesh style, the Clapton uses A1 inner wire, which is wrapped in Ni80 outer wire to produce outstanding flavour.
Best at: 55-75W | Resistance: 0.2ohm
Best at: 55-75W | Resistance: 0.2ohm
#H13 Single Conical Net Mesh Coil
By combining high density netting with a conical structure, this coil provides strong flavour and dense vapour.
Best at: 65-78W | Resistance: 0.15ohm
Best at: 65-78W | Resistance: 0.15ohm
#H11 Single Conical NexMESH Coil
Iterated from Wotofo's pioneering conical mesh core.
Best at: 60-70W | Resistance: 0.ohm
Best at: 60-70W | Resistance: 0.ohm
#H17 Rebuildable Deck
Featuring a honeycomb air intake system and two-post coil securing structure to make it easier to build.
RBA Building
Screw the build deck onto your mod, then take off the coil cap
Loosen the screws
Install the coil and tighten the screws, then cut off excess coil leads. Dry burn the coil at 25W to make it heat evenly
Insert the cotton, saturate the coil and cotton
Put the coil cap back on, and then attach the deck back onto the tank
How to Fill
Included in the Box
Specifications
Components
This tank is designed for direct lung inhale.
Please see our guide to the differences between MTL and DTL vaping
Please see our guide to the differences between MTL and DTL vaping
Replacement items for this tank
We found other products you might like!