FREE UK delivery with this item

See delivery info here
Order within for delivery tomorrow
£32.99

SMOK IPX 80 POD MOD KIT

Please note: Pods are 2ml capacity, as per TPD regulations.

The Smok IPX 80 kit features IP67 protection, an 80 watt maximum output and a huge, 3000 mAh built-in battery. Utilising the RPM 2 coils, this pod mod device can boast rich, stunning vapour and flavour for both mouth to lung and direct to lung vaping. Created with a 0.96-inch display, which shows you all your vaping information, and dual air-inlet rings allow for easy adjustments.

Max 80W - IP67 Tri-Proof - Air-Inlet Ring - 3000 mAh battery - RPM 2 Coil

Available in 7 Amazing Colours

Grey | Blue | Black Carbon Fibre
Brown | Red | Fluid 7-Colour
Fluid Black Grey

Available in grey, blue, black carbon fibre, brown, red, fluid 7-colour and fluid black grey.

IP67 Tri-Proof

The IP67 technology protects the IPX 80 from splashes of water, dust, shaking and accidental drops from a height.

IP67 Tri-Proof. Protects from water splashing, dust, shaking and drops.

80 Watt Maximum Output

The Smok IPX 80 ranges from 1W-80W and can be adjusted with the up and down buttons allowing you to tailor the wattage to your preference.

Min 1W. Max 80W. Adjust with up and down buttons.

0.96-Inch Display

A 0.96-inch screen accurately relays your real-time and relevant data, such as your puff count, puff length, wattage, battery percentage and more.

See your real-time data on the 0.96-inch display.

Firing Speed

The moment you activate the IPX 80, the moment flavour is delivered. The 0.001s firing speed pushes a perfect vaping experience.

Feel the instant change. 0.001s firing speed.

Beauty Matters

The silicone works to enhance the stability, providing the IPX 80 with layers and preventing fingerprint marks.

Silicone to create layers and prevent fingerprints.

Small and Powerful

The 3000 mAh built-in battery, designed for endurance and stability, can be charged with a USB Type-C cable.

Type-C Charging. 3000 mAh built-in battery.

IPX 80 RPM Pod and IPX 80 RPM 2 Pod

The SMOK IPX 80 pod mod kit is compatible with both RPM and RPM 2 pods. Each pod is designed to be used with a different coil and is not cross-compatible with each another.

The IPX 80 comes with an RPM 2 pod, which works with Smok RPM 2 coils.

The IPX 80 RPM pod (available separately) works with Smok RPM coils.

IPX 80 RPM 2 and IPX 80 RPM pod compatibility.

Duck-Billing Mouthpiece

The flatter the mouthpiece is, the less likely there is to be leakage spilling into your mouth.

Flat mouthpiece to prevent leakage and e-liquid spilling.

Adjustable Airflow

An interesting air-inlet ring can be rotated to the left to increase the air intake and to the right to decrease air intake.

Air-inlet ring. Turn left to increate air intake. Turn right to decrease air intake.

RPM 2 Coils

Included with the Smok IPX 80 is an RPM 2 0.16ohm mesh coil and an RPM 2 0.6ohm MTL dual coil.

RPM 2 Mesh 0.16ohm coil for direct to lung vaping. RPM 2 0.6ohm MTL DC coil for mouth to lung vaping.

Coil Style Resistance Power Range Suitable For
RPM 2 Mesh 0.16 ohms 25 to 50 watts
Best:
40W
Direct to lung vaping
High VG E-Liquids
RPM 2 DC MTL 0.6 ohms 12 to 25 watts
Best:
12-25W
Mouth to lung vaping
50/50 E-Liquids
Nic Salts

Five Protections

Featuring five safety protections, including:
Lithium Battery Protection | Atomiser Detection
8 Second Cut-Off | Short Circuit Protection
Low Voltage Protection

Five safety protections to ensure proper safety.

How to Fill with E-Liquid

To fill this pod mod kit with e-liquid, simply remove the pod, pull out the rubber plug, fill with e-liquid and then firmly close the plug.

Pull out pod. Pull out rubber plug. Fill with e-liquid. Close plug.

Included with the Kit

Included with the IPX 80 kit is an IPX 80 device, an IPX 80 RPM 2 pod, an RPM 2 0.16 Mesh coil, an RPM 2 0.6ohm MTL Dual coil, a USB Type-C cable and a user manual.

View of the outside packaging.

Specifications

Specifications of the IPX 80 kit.

Components

Components view of the IPX 80 kit.

To avoid premature coil failure, be sure to follow our coil priming guide.

Depending on how many cigarettes you smoke, we recommend the following strength e-liquids with this kit:
1 to 5 Cigarettes a day - Choose 3mg of traditional nicotine
6 to 14 Cigarettes a day - Choose 6mg traditional nicotine or 10mg Nic Salt
15+ Cigarettes a day - Choose 12mg traditional nicotine or 20mg Nic Salt
Not sure what Nic Salts are? See our guide here.

5 Pack
MTL & DTL

SMOK RPM Replacement Coils
£12.99
25 reviews
5 Pack
MTL & DTL

SMOK RPM 2 Replacement Coils
£14.99
6 reviews
Single
RBA

SMOK RPM RBA Kit
£7.99
1 review
Customer Reviews
5.0 Based on 1 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
A
22/03/2021
Adam
United Kingdom United Kingdom
I recommend this product
Perfect little mod vape

Replaced a Voopoo mod with this, the Voopoo kept burning the coils no matter how much priming they got and leaked out liquid through the mouth piece, this SMOK on the other hand has been a real beauty, simple to use, fill up and no leakage or coil burns after a few days of use. Shame the fire button is so small, but can live with that, the air flow coils are a bit hard to adjust at first but after a few turns they become easier to move to the right position.

You might also like...