Aspire Tigon Tank




Introducing the Tigon tank from Aspire. An easy to use tank with ‘child safe’ features. Available in four stylish colour finishes, Stainless Steel, Blue, Rainbow, and Black. It can be used as a MTL (mouth to lung) or a restricted DTL (direct to lung) vape device. It is the first Aspire product to use an ingenious design that seals the wicking holes in the tank when the coil is removed.

The Tigon tank comes supplied with a choice of MTL, longer style drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL vaping.

To fill, first pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill up. To close the tank, simply slide the top cap back into place covering the silicon seal and push down.

On the 
Aspire Tigon tank, coil replacement can be achieved by unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.
Remember, when using a new coil, to follow the Vape UK coil priming guide
When removing the glass tube, you need to follow these steps. First, unscrew and remove the base hardware and pull out the coil. Then invert the tank, and using the special key provided, unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram). Next, remove the glass tube. Replace the glass tube and follow the steps in reverse, (it is easier to place the screw onto the key first to locate it into the top hardware), secure the screw, insert the coil and replace the base hardware.
The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.


1x Tigon Tank (2.0ml) / 1x Glass tube / 1x Extra drip tip / 2x Coils(1x 0.4Ω preinstalled & 1x 1.2Ω) / 10x O-rings / 1x Warranty Card / 1x Screw adjustment tool / 1x User Manual
Replacement coils available here