Aspire Tigon Kit with FREE 10ml Vape UK E-Liquid

1

£39.99

Tigon

 

Introducing the Tigon kit from Aspire. An easy to use pen style deive with ‘child safe’ features. Available in four stylish colour finishes, Stainless Steel, Blue, Rainbow, and Black. It can be used as a MTL (mouth to lung) or a restricted DTL (direct to lung) vape device. It comes with a long lasting, built in battery and works in ‘By-Pass’ mode. It is the first Aspire product to use an ingenious design that seals the wicking holes in the tank when the coil is removed.

The Aspire Tigon Kit comes in a 23mm wide, 2ml capacity TPD version. The battery capacity is 1800mAh, more than enough to keep you going throughout the day under normal use.

The Tigon kit comes supplied with a choice of MTL, longer style drip tip and a slightly wider bore ‘stubby’ style drip tip more suited to restricted DTL vaping.


To fill, first pull up on the top cap, then with your thumb or finger on the marker, slide open the top cap to reveal the silicon leak proof seal of the fill port. The silicon fill port on the TPD version tank has a self-sealing valve into which you can insert your chosen filling bottle nozzle to fill up. To close the tank, simply slide the top cap back into place covering the silicon seal and push down.
 

On the 
Aspire Tigon tank, coil replacement can be achieved by unscrewing the base hardware, pulling out the old coil and replacing with a new one. Then screwing the base hardware back on again. Note that the Tigon tank can still hold e-liquid when changing the coil, this is because the wicking holes in the tank are covered by a spring loaded sleeve that will slide shut sealing the holes when the coil is removed.
 
Remember, when using a new coil, to follow the Vape UK coil priming guide
When removing the glass tube, you need to follow these steps. First, unscrew and remove the base hardware and pull out the coil. Then invert the tank, and using the special key provided, unlock the top hardware by placing it in the slot of the screw holding the top hardware (see diagram). Next, remove the glass tube. Replace the glass tube and follow the steps in reverse, (it is easier to place the screw onto the key first to locate it into the top hardware), secure the screw, insert the coil and replace the base hardware.
The first Aspire product to use an ingenious design that will seal the wicking holes in the tank when the coil is removed.

Kit Contents

1x Tigon Kit (2.0ml) / 1x Glass tube / 1x Extra drip tip / 2x Coils(1x 0.4Ω preinstalled & 1x 1.2Ω) / 10x O-rings / 1x Warranty Card / 1x Screw adjustment tool / 1x User Manual / 1x USB Cable
 

Depending on how many cigarettes a day you smoke, 
we recommend choosing the following E-Liquid nicotine strength with this kit (using the 1.2hm coil)

1 to 10 Cigarettes a day - Choose 6mg
11+ Cigarettes a day - Choose 12mg or 20mg Nic Salt
 
Replacement coils available here

Customer Reviews

Based on 1 reviews
5 ★
0% 
0
4 ★
0% 
0
3 ★
0% 
0
2 ★
100% 
1
1 ★
0% 
0
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

MG
03/10/2019
Molly Gilbert

Leaked

It was fine for a few days and then it began to leak so I changed the coil as advised by the company and it was fine for a few days and then it began to leak through the air hole again. All of the liquid both times leaked through out of the air hole. Had to send it back, hoping for a refund.