Nitecore V2 In Car Speedy Dual Battery Charger

FREE UK delivery with this item

£21.99

NITECORE V2 IN CAR SPEEDY DUAL BATTERY CHARGER

The V2 dual battery charger by Nitecore has a broad range of compatibility, features three charging modes, USB support and is capable of charging two battery cells simultaneously.
Featuring:
Total Speed up to 6A including 3A per slot | USB output
Automatically identifies battery types, capacity and power | Optimal Heat Dissipation

Compatible with:
Li-ion/IMR:
14500 | 14650 | 16500 | 16340 | 16650
17350 | 17500 | 17650 | 17670 | 18350
18490 | 18500 | 18650 | 22500
22650 | 25500 | 26500 | 26650
Unprotected batteries:
17700 | 18700 | 20700
21700 | 22700 | 26700
NI-MH(NiCd): AA, C

USB Output, total speed up to 6A including 3A per slot.

Rapid, Fast Charging

The V2 battery charger can reach speeds up to 3A in each slot. Total charging current up to 6A.

Total charging current up to 6A

It only takes 40 minutes to rapidly charge an IMR battery to 80%.

40 minutes to charge an IMR battery to 80%.

Cup Shaped Design

The cup shaped design perfectly fits the into the cup holder of a car, held firmly in place in events such as accelerating, turning or braking.

Cup shaped design keeps in secure in the cup holder of a car.

USB Output Ports

2 USB output ports for charging devices on the go. The max output of each USB port is 5V, 2.1A.

Charge your devices on the go with the handy USB output ports.

Easy to Operate

Blue LEDs indicate the charging current, displayed on three different levels. Green LEDs indicate the current battery power and charging status.

Blue LEDs indicate the charging current. Green LEDs indicate the current battery power and charging status.

Automatic and Intelligent

A built-in micro processor automatically identifies battery types and selects the most appropriate charging mode. (CC, CV and -dV / dt).

Automatically identifies battery types and selects appropriate charging mode.

Optimal -dV / dt Charging

-dV / dt charging program is designed for NI-MH/Ni-Cd batteries to detect the battery status and control the best time to cease charging, whilst delivering maximum power and preventing overcharging.

Detects battery status, controls timing for ceasing charging and delivers max power.

Unique Cooling Fins

The uniquely designed cooling fins act as heat sinks and help the V2 dissipate heat effectively.

Cooling fins help to dissipate heat.

Car Charging

The included car charging cord (12V) is compatible with the majority of cars.

12V car charging cord is compatible with most cars.

Battery Activation

After a battery is installed, the V2 will test and attempt to activate the battery before charging.

The V2 will test and attempt to activate the battery before charging.

Li-ion Battery Recovery

Upon the insertion of a 0V IMR battery, all three green LEDs over the slot will blink together to indicate the battery is non-rechargeable. Press and hold the function switch to enter recovery mode.
Note: When attempting to activate an IMR battery, reverse polarity protection is temporarily disabled. Take exceptional care to ensure batteries are correctly inserted.

A function switch sits on top of the slot and can be used to enter recovery mode, by pressing and holding.

Multiple Protections

The V2 features multiple protections to ensure safe charging.

Overtime Charging Protection

If the accumulated charging time exceeds ten hours, it will automatically terminate charging and all the green LEDs will turn on.

Anti Short-Circuiting and Reverse Polarity Protection

If a battery is inserted with reverse polarity or is short-circuited, three green LEDs above the relevant slot will blink to notify users.

Proportion Integration Differentiation System

The PID system will automatically regulate the charging temperature within the safety limit when charging in a large current.

Overtime charging protection, anti short-circuiting and reverse polarity protection, proportion integration differentiation system.

Safe Material

The V2 is constructed from flame retardant and fire resistant PC materials to extend the lifespan and ensure proper safety.

Built with flame retardant and fire resistant PC materials.

Specifications

Input: DC 12V 42W(max) | Weight: 198 grams

Specifications of the V2 battery charger by Nitecore.

Please see our comprehensive guide to battery safety.

Customer Reviews