NITECORE INTELLIGENT D2 DUAL BAY BATTERY CHARGER
The Intelligent D2 battery charger by Nitecore is ultra-compatible, and can charge up two battery cells
at one time.
LCD Screen | Intelligent Circuitry | Globally Insured
10440 | 14500 | 16340 | 17500
17670 | 18350 | 18490 | 18650
22650 | 26650
AAA, AAA, AAAA, C
Compact and Compatible
The D2 is able to accommodate to two batteries of varying sizes and chemistries, and is compatible with IMR, LiFePO4, Li-ion, Ni-MH/Ni-Cd batteries.
The integrated microprocessor automatically identifies the battery type and selects the appropriate charging voltage and current. The charging mode is automatically selected after the D2 detects the battery status.
Optimal Design for Ni-MH/Ni-Cd Batteries
The -dv/dt charging program for Ni-MH/Ni-Cd batteries detects the battery status to determine the appropriate charging and termination voltage. This feature offers maximum power without the risk of overcharging.
Revolutionary Upgrade for IMR Batteries
>With the extremely low internal resistance of IMR batteries, they may be overcharged in a regular Li-ion battery charger. The D2 addresses this problem by incorporating an optimised IMR charging system that is able to monitor the entire charging process, ensuring the end voltage is always within safe limits, which helps to extend battery life.
Optimised LiFePO4 Charging
Press and hold the "MODE" button for more than 2 seconds to activate LiFePO4 charging mode, indicated by "LiFePO4" showing on the digital screen.
Optimised for Small Capacity Batteries
Batteries of a small capacity, such as the 10440, 16340 and AA batteries, can overheat and also have a shortened lifespan. The D2 features a low current charging program to address this problem.
Press and hold the side button "MODE" for more than 1 second whilst charging until "Low" appears on the right to indicate that the low current charging mode is activated.
Highly Visible and Intuitive Display
An LCD screen, built on the sleek black surface, presents the charging progress, battery type, voltage and more in high-contrast, black and white. Press the side "MODE" button to select a desired reading.
No Detail Escapes
The D2 shows all of the charging information clearly and precisely, from charging voltage, charging current and elapsed charging time to charging mode and battery type.
Always Keeps You in the Loop
When charging has completed, all five battery indicator bars will stop flashing and illuminate steadily while "Chg.Finish" appears on the digital display.
Overnight Charging Function
Hold the "SLOT" button for more than 1 second to turn off the LCD back-light and eliminate nightly disturbances. To turn the back-light back on simply hold the "SLOT" button for more than 1 second.
Quality Materials for Top Safety
The D2 battery charger is built with ABS fire retardant materials and is constructed to the highest standards of safety.
Warm but Never Hot
Built-in temperature monitoring system detects in degrees, similar to that of a thermometer. To prevent overheating, the D4 features optimal heat dissipation to ensure reliability and safety.
Down to the Finest Detail
Made of pure copper, the spring-loaded battery contact plates help to minimise contact resistance to achieve a more precise charging voltage, generate less heat and provide a smooth sliding action when installing and removing batteries.
Reverse Polarity Protection
The integrated reverse polarity protection feature will flash the power indicator bars quickly and display "Err" when batteries are incorrectly installed.
Indoor & Travel Use
The D2 is a dependable companion at home and on the road, operating on either 100-240VAC (mains) or 12VDC.
Input voltage: AC 100-240V 50/60Hz 0.25A (MAX) or DC 12V
Output current: (500 mA x 2)
Weight: 168 grams | Dimensions: 143 mm x 74 mm x 36 mm