Vaping Glossary – The ABCs of Vaping

If you're new to vaping, you'll probably come across plenty of words and phrases that seem confusing at first. From atomisers and airflow to mesh coils and nicotine salts, vaping has developed its own vocabulary over the years.

This A-Z vaping glossary explains the most common terms you'll see when buying a vape kit, choosing an e-liquid or reading one of our guides. Whether you're switching from smoking or simply want to understand how your device works, these simple explanations will help you vape with confidence!

 A

Atomiser

Atomiser is one of the oldest terms in vaping. It originally described the part of a vape that turns e-liquid into vapour using a heating element. In the past, this usually referred to a vape tank with a replaceable coil.

Today, you'll hear the term less often because most people simply refer to pods or tanks instead. However, an atomiser still means the part of a vape that contains the heating element and e-liquid.

Airflow Control (AFC)

Airflow control (AFC) allows you to adjust how much air enters your vape as you inhale. Many refillable pod kits and sub-ohm vape kits include adjustable airflow, while simpler devices often have fixed airflow.

Opening the airflow creates a looser, airier draw with larger clouds, while closing it produces a tighter inhale that's more similar to smoking a cigarette.

All Day Vape (ADV)

An all day vape (ADV) is a flavour that you enjoy using throughout the day without becoming bored of it or experiencing flavour fatigue – sometimes known as ‘vaper's tongue’.

Many vapers choose simple fruit, tobacco or mint flavours as their ADV because they remain enjoyable after repeated use!

Amps

Amps (amperes) measure electrical current. In vaping, you'll usually see this mentioned when referring to USB charging speeds rather than the vape itself.

Most modern vape kits support charging at around 2A, while some premium devices allow 3A fast charging. Always use the manufacturer-recommended charging cable and power source to protect your battery.

 B

Battery

Every vape kit contains a battery that powers the heating element. Some devices have a built-in rechargeable battery, while larger, more advanced kits may use removable batteries.

Battery capacity is normally measured in mAh (milliampere-hours). A higher mAh rating generally means longer battery life between charges.

Box Mod

‘Box Mod’ is an older term for a larger, box-shaped vape device. These devices usually offer adjustable wattage, larger batteries and more customisation than smaller vape pens.

Although the name is still recognised, most people today simply refer to them as sub-ohm vape kits or vape mods!

Bottom Fill

Bottom fill refers to pods or tanks that are refilled through a filling port on the underside. Although many modern pod systems now feature side-fill or top-fill designs, bottom-fill pods remain common and are usually sealed with a silicone plug to prevent leaks.

 C

Cap

On many modern pod systems, the cap is the removable mouthpiece that covers the filling port. Removing the cap gives you access to refill your pod with e-liquid.

Cap designs make refilling quicker while helping to keep the pod sealed during everyday use!

Coil

A coil is the heating element inside your vape. When you press the firing button or inhale on an inhale-activated device, the coil heats the e-liquid absorbed by the wick, creating vapour.

Traditional coils used a round wire wrapped into a spiral, but mesh coils are now the industry standard because they provide better flavour, faster heating and longer-lasting performance. Some devices also use ceramic heating elements.

Coils can be made from different metals, including Kanthal, stainless steel, and nichrome, with Kanthal being the most commonly used.

Ceramic Coil

A ceramic coil uses a ceramic heating element instead of traditional metal mesh or wire. Ceramic is designed to heat evenly and can offer a smooth flavour with good longevity.

While less common than mesh coils today, ceramic coils are still used in some pod systems.

Clearomiser

A clearomiser is another older vaping term that referred to a transparent tank allowing users to see how much e-liquid remained inside.

Today's refillable tanks and pods perform the same job, so you'll rarely hear this word used with modern vape kits!

Cloud Chasing

Cloud chasing is the practice of producing the largest possible vapour clouds with powerful vape kits, high VG e-liquids, and low-resistance coils.

Most people who switch from smoking don't need to cloud chase. Mouth-to-lung (MTL) pod kits focus on nicotine delivery rather than producing huge clouds.

Closed System

A closed system is a vape that uses prefilled pods or cartridges. Once the pod is empty, it is replaced rather than refilled.

Closed systems are popular with beginners because they're simple to use and require very little maintenance.

Cigalike

Cigalikes were some of the earliest electronic cigarettes and were designed to closely resemble traditional tobacco cigarettes in size and appearance.

Modern pod systems have largely replaced cigalikes because they offer better battery life, improved flavour and more satisfying nicotine delivery!

Concentrate

Flavour concentrate is the flavouring used to create e-liquid before nicotine, propylene glycol (PG) and vegetable glycerin (VG) are added.

DIY e-liquid mixers often use concentrates to create their own flavour combinations.

 D

Direct to Lung (DTL)

Direct to Lung (DTL) vaping involves inhaling vapour straight into the lungs, similar to taking a deep breath.

DTL vaping usually uses low-resistance mesh coils, higher power settings and high VG e-liquids to produce larger clouds and a smoother inhale.

Diacetyl

Diacetyl is a flavouring ingredient that became controversial after being linked to serious lung disease when inhaled in industrial settings.

Legitimate manufacturers in the UK do not deliberately add diacetyl to regulated e-liquids since the ingredient is banned in the production of vape liquids. However, illegally manufactured or counterfeit vape products may not meet the same safety standards, making it important to buy from trusted retailers!

Draw Activation

Draw activation, also known as inhale activation, means your vape automatically produces vapour when you inhale through the mouthpiece.

Many beginner-friendly pod kits use draw activation because it removes the need for a firing button.

Drip Tip

The drip tip is the removable mouthpiece found on many refillable tanks and sub-ohm vape kits. Different drip tips come in various sizes and shapes to suit different vaping styles – especially MTL and DTL vaping.

Dripping

Dripping is an older vaping technique used mainly by experienced enthusiasts with specialised rebuildable atomisers.

Instead of filling a tank, e-liquid is dripped directly onto the exposed wick before vaping. While it can produce excellent flavour, it requires regular refilling and is now considered a niche hobby rather than a mainstream way to vape!

Dry Hit

A dry hit happens when the coil's wick isn't fully soaked with e-liquid before heating.

Instead of producing smooth vapour, the coil burns the dry cotton, creating an unpleasant burnt taste. Priming new coils properly and keeping your pod topped up with e-liquid helps prevent dry hits.

Disposable

A disposable vape is a single-use vape device that comes prefilled with e-liquid and a built-in battery.

Once the battery or e-liquid runs out, the entire device is disposed of rather than recharged or refilled. Following the UK ban on disposable vapes, reusable refillable and prefilled pod systems have become the preferred alternative!

 E

E-Liquid

E-liquid, sometimes called vape juice or e-juice, is the liquid used in a vape. When heated by the coil, it turns into the vapour that you inhale.

Most e-liquids contain propylene glycol (PG), vegetable glycerin (VG), flavourings and, if chosen, nicotine. They are available in a wide range of flavours, nicotine strengths and VG/PG ratios to suit different vaping styles.

E-Liquid Capacity

E-liquid capacity refers to how much vape liquid a pod, tank or bottle can hold. In the UK, refillable pods and tanks are limited to a maximum capacity of 2ml under current regulations.

E-liquid bottles come in various sizes, with 10ml bottles commonly used for nicotine-containing e-liquids and larger nicotine-free shortfills available for sub-ohm vaping.

Electronic Cigarette

Electronic cigarette is the original name for what most people now simply call a vape or vape kit. Although the technology has changed significantly over the years, the aim remains the same – providing nicotine without burning tobacco!

E-Juice

E-juice is simply another name for e-liquid or vape juice. The terms all refer to the same product and can generally be used interchangeably.

 F

Filling Port

The filling port is the part of the vape pod where you fill it with e-liquid.

It can be hidden behind silicone rubber on the side or bottom of the vape pod, or under a removable mouthpiece at the top.

Vape tanks can have their filling ports located on the side or the top, with a sliding mechanism that reveals them.

Firing Button

The firing button is the button used to activate a vape manually. Pressing it sends power from the battery to the heating element, producing vapour.

Many modern pod kits combine a firing button with inhale activation, while some rely entirely on automatic draw activation.

Fixed Airflow

Fixed airflow means the amount of air entering the vape can’t be adjusted by the user. Most beginner-friendly pod systems have fixed airflow because they're designed to provide a consistent draw without needing any adjustments.

Flashing Light

Many vape kits without screens use flashing LED lights to communicate different battery levels, charging status or safety protections.

For example, a flashing light may indicate a low battery, a short circuit, overheating or that the device isn't detecting the pod correctly. The meaning varies between manufacturers, so it's always worth checking your user manual.

Flooding

Flooding happens when too much e-liquid enters the coil chamber. This can reduce vapour production, cause gurgling sounds or even allow small amounts of e-liquid to reach the mouthpiece. Overfilling the pod or inhaling too hard can sometimes cause flooding.

Flavourings

Flavourings are food-grade ingredients used to give e-liquids their taste. Manufacturers combine different flavour concentrates to create everything from fruits and desserts to tobacco, menthol and drink-inspired flavours.

Freebase Nicotine

Freebase nicotine is the traditional form of nicotine used in e-liquids.

Compared with nicotine salts, it usually provides a stronger throat hit, particularly at higher strengths. Lower-strength freebase liquids are commonly used with refillable pod kits and sub-ohm vape kits.

 G

Glass Tank

A glass tank is the transparent section of a refillable vape tank that holds the e-liquid.

If damaged, the glass section can usually be replaced without replacing the entire tank, making maintenance more affordable.

Gurgling

Gurgling is a bubbling sound that occurs when excess e-liquid builds up inside the coil chamber.

This often happens because the pod has flooded or because condensation has collected in the airflow. Removing excess liquid and ensuring the pod is fitted correctly usually resolves the problem.

Gunk

Gunk is the dark stuff that gradually builds up on a vape coil over time! Sweeter e-liquids tend to leave more residue, reducing flavour and vapour production. Once a coil becomes heavily gunked up, take that as a sign it’s time to replace it.

 H

Heated Tobacco Product (HTP)

A heated tobacco product (HTP) heats specially designed tobacco sticks instead of burning them.

Unlike vaping, which heats e-liquid, heated tobacco products still contain real tobacco. Although they avoid combustion, they’re a different category of product from electronic cigarettes.

High VG

High VG refers to e-liquids that contain a larger percentage of vegetable glycerin than propylene glycol.

High VG liquids produce thicker vapour and smoother inhales, but are generally designed for powerful sub-ohm vape kits rather than smaller pod systems.

High Ohm (Resistance)

A high-ohm coil has a higher electrical resistance, typically around 0.8Ω or above. Higher-resistance coils are commonly used for MTL vaping because they require less power, use less e-liquid, and often work well with higher nicotine strengths.

Heating Element

The heating element is the component that warms the e-liquid to create vapour. In modern vape kits, this is usually a mesh coil, although some devices use ceramic heating elements or older-style wire coils.

 I

Inhalation

Inhalation simply means drawing vapour from the vape into your mouth or lungs!

Different vape kits are designed for different inhalation styles, including MTL, DTL and restricted direct-to-lung (RDTL).

Inhale Activation

Inhale activation allows a vape to work automatically when you take a puff. There's no need to press a button, making inhale-activated devices particularly popular with beginners and former smokers.

Internal Battery

An internal battery is permanently built into the vape device and cannot be removed by the user. Once depleted, it can simply be recharged using the device's charging port, usually via USB-C.

 K

Kanthal

Kanthal is one of the most widely used metals for vape coils. It's durable, heats consistently, and works well in standard-wattage mode, making it the most common material in mesh coils today.

 L

Leaking

Leaking occurs when e-liquid escapes from the pod or tank. Common causes include damaged seals, overfilling, worn coils or leaving the device on its side for extended periods. Keeping your vape clean and replacing worn parts can help prevent leaks.

Lithium-ion

Lithium-ion is the rechargeable battery technology used in almost all modern vape kits. These batteries provide a good balance of performance, capacity and rechargeability, but should always be charged using the manufacturer's recommended equipment.

Low Resistance

Some vape kits display a low resistance warning when they detect a coil resistance outside their safe operating range.

This safety feature helps prevent the device from operating incorrectly if a coil is damaged or incompatible.

Low Ohm (Resistance)

A low-ohm coil generally has a resistance below 0.8Ω. Low-resistance mesh coils are designed for RTDL and DTL vaping and operate at higher wattages, producing larger clouds and stronger flavour.

Low Voltage

A low voltage warning usually means the battery no longer has enough charge to power the device safely. Recharging the battery normally clears the warning and restores normal operation.

 M

mAh (Milliampere-hour)

mAh stands for milliampere-hour and measures a battery's capacity. The higher the mAh rating, the longer the battery generally lasts between charges, though actual battery life also depends on your wattage settings and vaping habits.

Mouth to Lung (MTL)

Mouth-to-lung (MTL) vaping closely replicates the way most people smoke a cigarette.

The vapour is first drawn into the mouth before being inhaled into the lungs. MTL devices usually use higher-resistance coils, tighter airflow and nicotine salts or freebase nicotine.

Mod

A mod is another older term for a larger, more powerful vape device.

Originally, mods were popular with experienced users because they offered extensive customisation and compatibility with rebuildable atomisers. Today, most people simply refer to these devices as sub-ohm kits.

Milligrams (mg)

Milligrams (mg) indicate the strength of nicotine in an e-liquid. For example, a 10mg nicotine salt contains half the nicotine concentration of a 20mg nicotine salt. Choosing the right strength depends on your previous smoking habits and personal preference.

Millilitres (ml)

Millilitres (ml) measure the volume of e-liquid. You'll see this used to describe the capacity of pods, tanks and e-liquid bottles. In the UK, refillable pods and tanks are limited to 2ml, while nicotine-containing e-liquids are usually sold in 10ml bottles.

Mesh Coil

A mesh coil is the standard heating element used in most modern vape kits. Instead of using a single round wire, mesh coils use a thin sheet of perforated metal that heats more evenly across a larger surface area. 

This provides improved flavour, faster heating and often a longer lifespan than traditional wire coils.

MHRA

The Medicines and Healthcare products Regulatory Agency (MHRA) is the UK government body responsible for regulating medical devices and overseeing the notification of vaping products sold in the UK.

Manufacturers must notify the MHRA before compliant vaping products can be legally placed on the UK market, helping to ensure they meet current safety and quality standards.

 N

Nicotine

Nicotine is the naturally occurring stimulant found in tobacco plants. While it’s the substance people become dependent on, it’s not the primary cause of smoking-related diseases. Those diseases are mainly caused by the thousands of harmful chemicals produced when tobacco is burned.

Vapes deliver nicotine without combustion, making them a less harmful alternative for adult smokers who would otherwise continue smoking!

Nicotine Strength

Nicotine strength tells you how much nicotine is contained in an e-liquid. In the UK, it's measured in milligrams per millilitre (mg/ml) – but you'll often simply see it written as 5mg, 10mg or 20mg.

Choosing the right strength depends on how heavily you previously smoked and the type of vape kit you're using. Higher strengths are generally used with MTL pod systems, while lower strengths are more suitable for sub-ohm vaping.

No-Nic

No-Nic simply means an e-liquid contains no nicotine. You'll also see this described as 0mg or ‘zero nic’.

Many people gradually reduce their nicotine strength over time before switching to nicotine-free e-liquids altogether.

Nicotine Salts (Nic Salts)

Nicotine salts, often shortened to ‘nic salts’, are a type of nicotine commonly used in pod kits.

They provide a smoother throat hit than traditional freebase nicotine at the same strength, allowing higher nicotine levels to be used more comfortably. Nic salts are particularly popular with people switching from smoking because they provide fast nicotine satisfaction.

Nic Shot

A nic shot is a small 10ml bottle of unflavoured nicotine designed to be mixed into a nicotine-free shortfill.

Adding one or more nic shots allows you to create your preferred nicotine strength while keeping the flavour balanced.

Nichrome

Nichrome is a metal alloy sometimes used to make vape coils. It heats up quickly and gives responsive performance, making it a popular alternative to Kanthal in some mesh coils.

 O

Ohm

An ohm (Ω) is the unit used to measure the electrical resistance of a vape coil.

Generally speaking, lower-resistance coils produce more vapour and operate at higher power levels, while higher-resistance coils use less power and are better suited to MTL vaping!

Ohm's Law

Ohm's Law is a basic electrical principle that explains the relationship between voltage, current and resistance.

Modern regulated vape kits automatically perform these calculations for you, so you don't need to work them out yourself. But understanding Ohm's Law is useful for experienced users who build their own coils or use rebuildable atomisers.

OLED Screen

An OLED screen is a small digital display found on many advanced vape kits. It can show useful information such as battery level, wattage, coil resistance, puff count and various safety messages.

O-Ring

O-rings are small rubber seals fitted inside refillable tanks and some pods. They help create a tight seal between different components to prevent leaks. If an O-ring becomes worn or damaged, replacing it often solves leaking problems.

Open System

An open system is a refillable vape that allows you to choose and add your own e-liquid. Unlike closed systems that use prefilled pods, open systems offer much greater flexibility when it comes to flavours, nicotine strengths and e-liquid types.

 P

Pod (Vape Pod)

A vape pod is the removable part of the vape kit at the top that holds the e-liquid and contains the coil that heats it as you inhale on the mouthpiece.

Vape pods are magnetically connected to the vape kit and can be prefilled with e-liquid or come empty with a filling port for you to fill with your chosen e-liquid.

Pod System

Pod systems are the most popular vape kits available today!

Instead of using a traditional tank, they use a compact pod that either contains a built-in coil or accepts replaceable coils. Pod systems are available as refillable and prefilled devices and are ideal for beginners thanks to their simple design.

Propylene Glycol (PG)

Propylene glycol (PG) is one of the two main base ingredients found in e-liquid.

PG is a thin, flavourless liquid that carries flavour especially well and gives much of the throat hit that many ex-smokers enjoy. E-liquids with a higher PG content are usually intended for MTL vaping.

Puff Count / Puff Count Reset

Many modern vape kits include a puff counter that records how many puffs you've taken.

Some devices allow you to reset this number, making it useful for monitoring your vaping habits or tracking how long a coil lasts!

Priming

Priming means allowing a new coil to fully absorb e-liquid before using it.

After filling your pod or tank, it's usually recommended to leave it for around 5-to-10 minutes before taking your first puff. Priming helps prevent dry hits and can extend the life of your coil.

 R

Rebuildable Atomiser (RBA)

A rebuildable atomiser (RBA) is a type of vape designed for experienced users who prefer to build and install their own coils.

These devices were particularly popular around 10-to-15 years ago, offering complete customisation over coil materials, resistance and wicking. While RBAs are still available, they're now considered a specialist option.

Rebuildable Dripping Atomiser (RDA)

An RDA is a type of rebuildable atomiser that doesn't use a traditional e-liquid tank.

Instead, the user drips e-liquid directly onto the exposed wick every few puffs. RDAs remain popular among some enthusiasts because they can provide exceptional flavour, but they require considerably more maintenance than modern pod systems!

Rebuildable Tank Atomiser (RTA)

An RTA combines a rebuildable deck with an integrated e-liquid tank. This allows experienced users to build their own coils while enjoying the convenience of carrying a larger supply of e-liquid compared with an RDA.

Resistance

Resistance describes how much a vape coil restricts the flow of electricity and is measured in ohms (Ω).

The resistance of a coil influences how much power it requires and how it performs. Lower-resistance coils are generally suited to DTL vaping, while higher-resistance coils are designed for mouth-to-lung devices.

Restricted Direct to Lung (RDTL)

Restricted Direct to Lung (RDTL) is a vape inhalation style that sits between mouth-to-lung and direct-to-lung vaping.

It offers a looser draw than an MTL device but remains tighter than a full DTL setup. Many refillable pod kits can be adjusted to provide an RDTL vape simply by changing the airflow and coil.

 S

Short Circuit

A short circuit occurs when electricity flows incorrectly within the vape, often due to a damaged coil or a poor electrical connection.

Modern vape kits include built-in protection that detects short circuits and prevents the device from firing until the problem has been resolved.

Steeping

Steeping is the process of allowing e-liquid ingredients to blend together over time.

People who mix their own e-liquids or add nic shots to shortfills often leave the bottle to steep for a short period to allow the flavours to fully develop. The term can also refer to allowing a newly filled pod to sit for several minutes so the coil becomes fully saturated before vaping.

Sub-Ohm

Sub-ohm vaping is when the coil has a resistance of less than 1.0Ω (ohm), hence the name sub-ohm. However, we mainly refer to coils as sub–ohm below 0.4Ω.

These coils operate at higher wattages and produce larger clouds of vapour, making them ideal for DTL vaping and high VG e-liquids.

Squonk

A squonk device is a specialised vape mod that features a soft e-liquid bottle inside.

Squeezing the bottle pushes e-liquid up into a rebuildable atomiser, reducing the need for manual dripping. Squonk devices were once popular with advanced hobbyists but are now considered a niche style of vaping!

Shortfills

Shortfills are large bottles of nicotine-free e-liquid that have extra space left inside for adding nic shots. They’re typically used with sub-ohm vape kits and are available in a wide range of VG/PG ratios and flavours.

Stainless Steel

Stainless steel is one of the metals used to manufacture vape coils. It offers fast heating, good durability, and can be used in both standard wattage and temperature control modes on compatible vape kits.

Spitback

Spitback happens when small droplets of hot e-liquid travel up through the mouthpiece during inhalation.

It's often caused by flooding, overfilling or excess e-liquid collecting around the coil. Cleaning the pod and avoiding overfilling can usually help prevent spitback.

Stealth Mode

Stealth vaping refers to inhaling and holding vapour in the lungs for longer before exhaling to reduce the visible cloud.

While this makes vapour less noticeable, it's still important to respect local rules and only vape where it's permitted!

Side Fill

A side-fill pod has a filling port on its side, usually protected by a silicone stopper.

Side-fill designs are simple, reliable and remain one of the most common refill methods found on modern pod systems.

 T

Tank

A tank is the part of a vape that holds e-liquid and connects to the device’s battery or mod. Inside the tank is usually a coil that heats the liquid to produce vapour.

Modern tanks are mostly refillable and designed for either MTL or DTL vaping, depending on coil resistance and airflow.

Thread

A thread refers to the connection point between the tank or pod and the battery device. The most common type is the 510 thread, which is the industry standard for most vape mods and tanks.

Some pod systems use proprietary connections instead, meaning pods only fit specific devices.

Temperature Control (TC)

Temperature Control (TC) is a vape mode that regulates the coil's maximum temperature rather than the wattage.

This helps prevent dry hits and can provide a more consistent vaping experience, but it requires compatible coils such as stainless steel, nickel or titanium.

Throat Hit

Throat hit is the sensation you feel in your throat when inhaling vapour. It’s influenced by nicotine strength, PG content, airflow and coil type. Many ex-smokers look for a strong throat hit to replicate the feeling of smoking.

TFT Screen

A TFT screen is a full-colour display found on many advanced vape kits. It shows detailed information such as wattage, battery level, coil resistance, puff count and sometimes customisable themes or settings.

Top Fill

Top-fill refers to pods or tanks that are filled from the top of the device. This design is widely used in modern vape kits because it’s quick, convenient and helps reduce leaks compared with older filling systems.

 U

USB-C

USB-C is the modern charging standard used in most vape kits. It allows faster, more reliable charging compared with older micro-USB ports and is now the industry standard for rechargeable devices.

 V

Vape Juice

Vape juice is another common name for e-liquid, which is the liquid used in vape devices to create vapour!

Vapour

Vapour is the aerosol produced when e-liquid is heated by the coil. It is what is inhaled and exhaled when vaping.

Vegetable Glycerin (VG)

Vegetable Glycerin (VG) is a thick, slightly sweet liquid used in e-liquid. VG produces denser vapour clouds and provides a smoother inhale than PG.

Volts

Volts measure the electrical pressure supplied by a vape battery to the coil.

Higher voltage can deliver more power, though most modern devices automatically regulate voltage based on wattage settings.

Variable Wattage (VW)

Variable Wattage (VW) is a mode that lets users adjust the power delivered to the coil.

Higher wattage produces more vapour and a warmer vape, while lower wattage provides a cooler, more efficient draw.

Vaper’s Tongue

Vaper's tongue is a temporary loss or reduction of flavour perception when vaping. This is often caused by vaping the same flavour for too long, dehydration or taste fatigue. Switching flavours or staying hydrated usually helps resolve it!

Vaping

Vaping is the act of inhaling vapour produced by heating e-liquid in an electronic device. It’s commonly used as an alternative to smoking traditional tobacco products.

 W

Watts

Watts measure the power output of a vape device. Higher wattage produces more vapour and stronger flavour, but uses more battery and e-liquid. Lower wattage provides a more discreet and efficient vape!

Wick

The wick is usually made from cotton and sits inside the coil. It absorbs e-liquid and delivers it to the heating element. When heated, the liquid in the wick turns into vapour.

Wire Coils

Wire coils are the older style of vape coils made from a single or twisted metal wire. They have largely been replaced by mesh coils in modern vape kits, as mesh provides better flavour, faster heating and improved lifespan.

 Z

Zero Nic

Zero Nic refers to e-liquids that contain no nicotine. These are often used by people who enjoy vaping for the flavour and experience but don’t want to consume nicotine.

Using Vape Kits Safely and Correctly

Always follow the manufacturer’s instructions for your device and use only compatible coils, pods, and charging equipment. Regularly clean your device, replace coils when flavour drops, and avoid overfilling tanks or pods to reduce leaks and dry hits.

Never leave charging devices unattended, and avoid using damaged batteries or cables. If your device shows warning lights or error messages, stop using it and consult the user manual!

The Research and Studies Into Vaping Continue

Vaping is a relatively new technology, and research into its long-term effects, usage patterns and public health impact is ongoing.

Current evidence consistently shows that vaping is significantly less harmful than smoking combustible tobacco, making it a widely used tool for adult smokers looking to switch away from cigarettes.

However, vaping is not risk-free, and it is intended for adult smokers or ex-smokers only!